Hi all. Right i am trying to create a lift. I had done this no problem on the 2nd version of LBP. There are 4 Floors. U can enter the lift and use a selecter to select floor level. But the dam lift is not moving. I am using Tags and followers. I have tried using 4 dif colours and have tried naming the tag Floor 1 Floor 2 etc but not moving. Driving me nuts. Thanks for help in advance

If you're using the followers to make the elevator move:
1. Make sure none of the materials and objects of the lift are set to static. (press the Square button on the parts of the lift)
2. Make sure NONE of the followers have Deceleration on (set it to 0).
3. Make sure there aren't any anti-gravity tweakers on the lift.
4. Make sure that the follower and corresponding tags are set to the same thing. (e.g. If you want Follower One to move to Tag A, tweak Follower One to follow green tags, and set Tag A to the color green)

yep have done this. was not sure if it was a bug on the game as copied the excat microchip design i used on my LBP Vita and from the Vita i had copied from my ps3 games.

Well, it must be a bug, then. I'd just try completely rebuilding the lift. There might have possibly been a little error somewhere. It COULD be a game glitch, too, because many movers glitch. Have you tried the old layer changers? Many LBP2 objects that use them (such as cars that can change layers) totally glitch up or slide right off of the map.